U++ framework: UppHub » Problem with PolyXml

Home » Developing U++ » UppHub » Problem with PolyXml (Bazaar : Control4U)

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

Problem with PolyXml [message #56246]

Sat, 13 February 2021 14:06

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Helllo,

It seems that the control4U (downloaded from UppHub)does no longer contain PolyXml and I get error when compiling my project with UPP15760. Sad

Is there a solution ? Razz

Thank you in advance for your reply and advice
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56261 is a reply to message #56246]

Mon, 15 February 2021 08:13

koldo
Messages: 3461
Registered: August 2008

Senior Veteran

Dear BioBytes

Controls4U still has PolyXML.h.

As far as I can see, Bazaar is no longer in the nighty builds and can only be obtained from svn. Please try to download the packages from there, as UppHub is still in preparation.

Best regards
Iñaki

Report message to a moderator

Re: Problem with PolyXml [message #56289 is a reply to message #56261]

Wed, 17 February 2021 14:28

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Dear Koldo,

Thank you very much for your reply and advice. It helps greatly. Smile

Have a good day
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56327 is a reply to message #56289]

Sun, 21 February 2021 17:32

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Hello,

I updated my system to 15786 version and still have issue with Control4U. The uppHub says that the library is installed but the directory is empty and the system cannot find the sysexec.h header Sad

See screenshots below. It could help in understanding the issue.

Thank you in advance for advice

Have a nice evening

Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56331 is a reply to message #56327]

Mon, 22 February 2021 11:42

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

Hi,

this should be fixed, reinstall Functions4U pls...

Report message to a moderator

Re: Problem with PolyXml [message #56335 is a reply to message #56331]

Tue, 23 February 2021 08:48

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Quote:

this should be fixed, reinstall Functions4U pls...

Hi Mirek,

Sorry but still an issue Sad

with Control4U when using upp nightly build dated of February 22nd.

Report message to a moderator

Re: Problem with PolyXml [message #56336 is a reply to message #56335]

Tue, 23 February 2021 08:57

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

BioBytes wrote on Tue, 23 February 2021 08:48

Quote:
this should be fixed, reinstall Functions4U pls...

Hi Mirek,

Sorry but still an issue with Control4U when using upp nightly build dated of February 22nd.

How are you testing? It works for me...

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56346 is a reply to message #56336]

Tue, 23 February 2021 21:11

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Quote:

How are you testing? It works for me...
Mirek

Hello Mirek,

Below see a screenshot showing that the Control4U package is still empty even after having reinstalled the library using uppHub.

Hope it could help

Thank you in advance for advice Smile

Biobytes

[Updated on: Wed, 24 February 2021 08:15]

Report message to a moderator

Re: Problem with PolyXml [message #56351 is a reply to message #56346]

Wed, 24 February 2021 21:24

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Hi All,

I can see the problem now, Please check screenshot below

The path of the repo is not correct for Control4U (it indicates Function4U instead of Control4U). Therefore theide cannot find the directory files which remains empty. Sad

Please correct it

Thanks in advance

Cheers
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56352 is a reply to message #56351]

Wed, 24 February 2021 21:53

Klugier
Messages: 1119
Registered: September 2012
Location: Poland, Kraków

Senior Contributor

Hello BioByte,

Could you remove UppHub directory completely and try to download Controls4U one more time. You can find directory path in settings:
index.php?t=getfile&id=6383&private=0

Also, can you check if you have Controls4U examples. You can verify it in PackageManager by selecting "Controls4U" assembly (right to "Main packages" DropList and left to "Search" edit field). If everything is there, you could try to remove "Controls4U" package from your project and add it one more time.

I made above tests and Controls4U on clean UppHub is downloaded correctly.

Klugier

Attachment: UppHubDirectory.png
(Size: 57.54KB, Downloaded 1275 times)

U++ - one framework to rule them all.

Report message to a moderator

Re: Problem with PolyXml [message #56353 is a reply to message #56352]

Wed, 24 February 2021 23:06

Klugier
Messages: 1119
Registered: September 2012
Location: Poland, Kraków

Senior Contributor

Hello,

Here is the screenshot presenting where you could find Controls4U examples:
index.php?t=getfile&id=6384&private=0

Klugier

Attachment: Controls4UExamples.png
(Size: 62.39KB, Downloaded 1273 times)

U++ - one framework to rule them all.

Report message to a moderator

Re: Problem with PolyXml [message #56354 is a reply to message #56351]

Thu, 25 February 2021 10:54

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

BioBytes wrote on Wed, 24 February 2021 21:24

Hi All,

I can see the problem now, Please check screenshot below

The path of the repo is not correct for Control4U (it indicates Function4U instead of Control4U). Therefore theide cannot find the directory files which remains empty.

Please correct it

Thanks in advance

Cheers
Biobytes

Is not it possible that Control4U is the first yellow line?

In any case, assuming that you have reinstalled everything (like downloaded nightly ide, then installed Controls4U in clean install) and it still does not work, we definitely need to track it down!

On possible tricky catch that comes to mind: If it was in broken state before and you have tried to add Controls4U, you might have accidentally created it in the first nest, empty. Can you check that there is no Controls4U folder in your first nest?

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56355 is a reply to message #56351]

Thu, 25 February 2021 11:02

Oblivion
Messages: 1284
Registered: August 2007

Senior Contributor

Hi,

I had encountered a seemingly similar problem when I first tested Upphub/Controls4u. In my case the culprit was the "bazaar assembly" itself.

The problem was solved after I'd removed the bazaar entry from the assemblies section in the main package selection screen.

Best regards,
Oblivion

Github page: https://github.com/ismail-yilmaz
Bobcat the terminal emulator: https://github.com/ismail-yilmaz/Bobcat
TerminalCtrl package https://github.com/ismail-yilmaz/Terminal

[Updated on: Thu, 25 February 2021 11:03]

Report message to a moderator

Re: Problem with PolyXml [message #56356 is a reply to message #56355]

Thu, 25 February 2021 21:55

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Thanks to all for trying to help Smile

Quote:

Is not it possible that Control4U is the first yellow line?

Mirek, please see the screenshot below showing that no Control4U is visible in the repository.

Quote:

Could you remove UppHub directory completely and try to download Controls4U one more time. You can find directory path in settings

Klugier, I deleted the uppHub directory in my Upp installation. Then I reinstalled the Control4U package from the starting splashscreen and the same problem happened. Sad

Here is the structure of my uppHub

Quote:

I had encountered a seemingly similar problem when I first tested Upphub/Controls4u. In my case the culprit was the "bazaar assembly" itself.

The problem was solved after I'd removed the bazaar entry from the assemblies section in the main package selection screen.

Oblivion, I did not have a bazaar entry in the assemblies section as shown below.

So I have no idea of what is happening as other packages, except Control4U/SysExec are correctly installed

Thank you for more advices
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56357 is a reply to message #56356]

Fri, 26 February 2021 01:01

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

You still not have checked that there is no Functions4U empty package in your MyApps directory...

Given all that you have written, that is the most likely culprit.

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56359 is a reply to message #56357]

Fri, 26 February 2021 18:58

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Quote:

You still not have checked that there is no Functions4U empty package in your MyApps directory...

Given all that you have written, that is the most likely culprit.

Mirek

Sorry but I am not sure to understand Embarassed

. Could you please give more details ?

Thanks in advance
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56360 is a reply to message #56359]

Fri, 26 February 2021 19:02

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

MyApps is a folder. Check what subfolders really are in that folder (using OS file manager).

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56362 is a reply to message #56360]

Sat, 27 February 2021 10:51

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Quote:

MyApps is a folder. Check what subfolders really are in that folder (using OS file manager).

Mirek

Thank you very much Mirek. Ok I understand now. I have copied the content of the uppHub in MyApps folder and Control4U package is now available Razz

See below.

The only problem Confused

which remains concerns SysExec which is not available from uppHub downloads. See the picture herehunder.

Waiting for your advice and many thanks in advance

Have a good day
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56363 is a reply to message #56362]

Sat, 27 February 2021 12:31

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

BioBytes wrote on Sat, 27 February 2021 10:51

Quote:
MyApps is a folder. Check what subfolders really are in that folder (using OS file manager).

Mirek

Thank you very much Mirek. Ok I understand now. I have copied the content of the uppHub in MyApps folder and Control4U package is now available See below.

Actually, you completely misunderstood. You were supposed to "Check what subfolders really are in that folder (using OS file manager).", not to copy anything, that completely spoiled everything (including your MyApps folder).

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56364 is a reply to message #56363]

Sat, 27 February 2021 14:40

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Quote:

Actually, you completely misunderstood. You were supposed to "Check what subfolders really are in that folder (using OS file manager).", not to copy anything, that completely spoiled everything (including your MyApps folder).

Ok my mistake. Here is the content of MyApps folder

Here is the splashscreen visible when Upp starts and the configuration of MyApps

The problem is that SysExec is not part of UppHub. The same issue will appear when using Scatter library!!

Sorry that there is still a problem
Biobytes

Report message to a moderator

Re: Problem with PolyXml [message #56365 is a reply to message #56364]

Sat, 27 February 2021 16:09

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

BioBytes wrote on Sat, 27 February 2021 14:40

Sorry that there is still a problem
Biobytes

Well, I am really intrigued by what this might be....

I have an idea: As long as you have the whole U++ in single folder, could you copy it somewhere, delete .exe, delete out folder, delete any of your's sources you do now want me to see, .zip and upload somewhere? (e.g. google drive)

Mirek

Report message to a moderator

Re: Problem with PolyXml [message #56367 is a reply to message #56365]

Sat, 27 February 2021 17:05

BioBytes
Messages: 312
Registered: October 2008
Location: France

Senior Member

Hi Mirek,

Here is the link to my Upp installation (Out and bin directories and theide.exe have been deleted)

https:// drive.google.com/file/d/1ZEe-FtXUdek5en3rXqMICJPuuxaIPVFW/vi ew?usp=sharing

I do not know whether you need to check my projet source (IVDManager) for which I have the problem of SysExec missing files. Let me know and I will post it the same way. Smile

Thank you very much for considering this issue

Looking forward to hearing from you
Biobytes

[Updated on: Sat, 27 February 2021 17:07]

Report message to a moderator

Re: Problem with PolyXml [message #56369 is a reply to message #56367]

Sun, 28 February 2021 11:23

mirek
Messages: 14291
Registered: November 2005

Ultimate Member

BioBytes wrote on Sat, 27 February 2021 17:05

Hi Mirek,

Here is the link to my Upp installation (Out and bin directories and theide.exe have been deleted)

https:// drive.google.com/file/d/1ZEe-FtXUdek5en3rXqMICJPuuxaIPVFW/vi ew?usp=sharing

I do not know whether you need to check my projet source (IVDManager) for which I have the problem of SysExec missing files. Let me know and I will post it the same way.

Thank you very much for considering this issue

Looking forward to hearing from you
Biobytes