Overview
Examples
Screenshots
Comparisons
Applications
Download
Documentation
Tutorials
Bazaar
Status & Roadmap
FAQ
Authors & License
Forums
Funding Ultimate++
Search on this site
Search in forums












SourceForge.net Logo
Home » Developing U++ » Documentation » Help Topic "Installing OpenSSL"
Help Topic "Installing OpenSSL" [message #34739] Fri, 09 December 2011 13:22 Go to next message
Wolfgang is currently offline  Wolfgang
Messages: 146
Registered: November 2011
Location: Germany
Experienced Member
Hi, tried to install OpenSSL for AES en/decryption and wanted to follow the step by step guide out of the Help Topic "Installing OpenSSL" but it refers to openssl-0.9.8l and the lastest release is 1.0.0e. I think it wouldn't be bad to update the Help Topic.

I've installed for MSC9:

Downloads:
Quote:

http://www.openssl.org/source/openssl-1.0.0e.tar.gz
http://www.activestate.com/activeperl/downloads


Extracted it to c:\temp\openssl-1.0.0e\
Now opened command shell (cmd):

cd C:\temp\openssl-1.0.0e\
perl Configure VC-WIN32 --prefix=c:/temp/openssl-bin/
cd C:\temp\openssl-1.0.0e\
%comspec% /k ""c:\Program Files\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat"" x86
cd C:\temp\openssl-1.0.0e\
ms\do_ms.bat
nmake -f ms\nt.mak
nmake -f ms\ntdll.mak


( http://www.ultimatepp.org/forum/index.php?t=msg&goto=256 17&#msg_25617)

Hope it helps!

best regards
Wolfgang
Re: Help Topic "Installing OpenSSL" [message #38637 is a reply to message #34739] Mon, 31 December 2012 14:25 Go to previous messageGo to next message
lectus is currently offline  lectus
Messages: 329
Registered: September 2006
Location: Brazil
Senior Member
Hello!
Thanks for this thread. To use SMTP with U++, OpenSSL is required.

I built the latest version (1.0.1c) following this method:
0) Install VC++ 2012 Express (you should already have it if you use U++)
1) Install ActivePerl.
2) Download https://www.openssl.org/source/openssl-1.0.1c.tar.gz
3) Extract openssl-1.0.1c.tar.gz with 7zip to C:\Temp\openssl-1.0.1c. Create a folder named C:\Temp\openssl-bin.
4) Open Start/Microsoft Visual Studio 2012/Visual Studio Tools/VS2012 x86 Native Tools Command Prompt (or x64 if you want it)
5) Type the commands:
Quote:

cd C:\Temp\openssl-1.0.1c
perl Configure VC-WIN32 --prefix=c:/temp/openssl-bin/
ms/do_nt.bat
nmake -f ms/nt.mak


It seems the the openssl-bin folder was ignored despite the --prefix command. Anyway it doesn't matter.
6) Wait for it to build. This the static lib. To build as DLL you'd change ms/nt to ms/ntdll.

7) Create a MyApps/OpenSSL folder.

Cool Copy C:\Temp\openssl-1.0.1c\inc32 to C:\MyApps\OpenSSL as C:\MyApps\OpenSSL\openssl

9) Copy C:\Temp\openssl-1.0.1c\out32 to C:\MyApps\OpenSSL as C:\MyApps\OpenSSL\lib

10) From the command prompt type the following commands:
Quote:

cd C:\MyApps\OpenSSL\lib
del *.exe *.pdb
xcopy libeay32.lib libeay32mtd.lib
xcopy ssleay32.lib ssleay32mtd.lib


This will delete all exe and pdb files leaving only the required lib files. This will also create the debug libraries (I'm too lazy to build one and this works fine).

11) Open TheIde with the SMTP example. Go to Setup/Build Methods, select your MSC11 compiler configuration, add these paths:
INCLUDE: C:\MyApps\OpenSSL
LIB: C:\MyApps\OpenSSL\lib

12) Hit Ctrl-F5 to build and run the SMTP example. Test it. It works.

[Updated on: Mon, 31 December 2012 14:33]

Report message to a moderator

Re: Help Topic "Installing OpenSSL" [message #39228 is a reply to message #38637] Sat, 02 March 2013 08:09 Go to previous messageGo to next message
deep is currently offline  deep
Messages: 197
Registered: July 2011
Location: Bangalore
Experienced Member
Hello,

I recently installed OpenSSL 1.01e from

http://slproweb.com/products/Win32OpenSSL.html

1. Follow the instructions. It is Installable file.

2. Install Visual C++ 2008 Redistributables. Use links from the same page. Select 32bit/64bit VC++ 2008 Redistributable as per your system.

I installed OpenSSL-32bit. On Win 7 64bit. VC++redist 64bit.

3. Add include/lib paths in U++ setup. I installed OpenSSL in "C:\OpenSSL-Win32\" folder

U++ settings
Setup->Build Methods.
For MinGW
C:\OpenSSL-Win32\lib\MinGW    -- lib folder path
C:\OpenSSL-Win32\include    -- Include folder path

For MSC10/MSC12/MSC12-64
C:\OpenSSL-Win32\lib\VC   -- lib folder path
C:\OpenSSL-Win32\include    -- Include folder path


Project->Package organizer
[B]For MSC[/B]
Select AESStream -> Libraries section
When MSC -- libeay32.lib gdi32.lib

[B]For MinGW[/B]
When WIN32 !MSC -- libeay32.a


With this setup I could compile and run Bazaar->DeEncrypter with MSC10 and MINGW both.


Warm Regards

Deepak

[Updated on: Wed, 24 September 2014 14:51]

Report message to a moderator

Re: Help Topic "Installing OpenSSL" [message #40726 is a reply to message #39228] Tue, 10 September 2013 17:14 Go to previous messageGo to next message
koldo is currently offline  koldo
Messages: 3006
Registered: August 2008
Ultimate Member
deep wrote on Sat, 02 March 2013 08:09

Hello,

I recently installed OpenSSL 1.01e from

http://slproweb.com/products/Win32OpenSSL.html

1. Follow the instructions. It is Installable file.

2. Install Visual C++ 2008 Redistributables. Use links from the same page. Select 32bit/64bit VC++ 2008 Redistributable as per your system.

I installed OpenSSL-32bit. On Win 7 64bit. VC++redist 64bit.

3. Add include/lib paths in U++ setup. I installed OpenSSL in "C:\OpenSSL-Win32\" folder

U++ settings
Setup->Build Methods.
For MinGW
C:\OpenSSL-Win32\lib\MinGW    -- lib folder path
C:\OpenSSL-Win32\include    -- Include folder path

For MSC10
C:\OpenSSL-Win32\lib   -- lib folder path
C:\OpenSSL-Win32\include    -- Include folder path


Project->Package organizer
[B]For MSC[/B]
Select AESStream -> Libraries section
When MSC -- libeay32.lib gdi32.lib

[B]For MinGW[/B]
When WIN32 !MSC -- libeay32.a


With this setup I could compile and run Bazaar->DeEncrypter with MSC10 and MINGW both.

Thank you deep. It works great!


Best regards
IƱaki
Re: Help Topic "Installing OpenSSL" [message #40770 is a reply to message #40726] Sat, 14 September 2013 09:14 Go to previous message
BioBytes is currently offline  BioBytes
Messages: 284
Registered: October 2008
Location: France
Experienced Member
Thank you very much Deep.

It works perfectly Razz

Regards

Biobytes
Previous Topic: translations
Next Topic: Fixes to "Callback macros" documentation
Goto Forum:
  


Current Time: Wed Oct 23 00:22:09 CEST 2019

Total time taken to generate the page: 0.01032 seconds