Home » Developing U++ » UppHub » Knob control
|
|
|
|
| Re: Knob control [message #27959 is a reply to message #27954] |
Thu, 12 August 2010 08:13   |
 |
koldo
Messages: 3459
Registered: August 2008
|
Senior Veteran |
|
|
| Quote: |
I'm not sure if you can add fine marks between the major marks. Could be set to 0 if a person does not want them.
|
No problem  .
Two questions:
- How would you call the marks between major marks?
- How would you call the mark locking knob behavior?
Best regards
Iñaki
[Updated on: Thu, 12 August 2010 08:25] Report message to a moderator |
|
|
|
| Re: Knob control [message #27963 is a reply to message #27959] |
Thu, 12 August 2010 10:11 |
jerson
Messages: 202
Registered: June 2010
Location: Bombay, India
|
Experienced Member |
|
|
| koldo wrote on Thu, 12 August 2010 11:43 |
Two questions:
- How would you call the marks between major marks?
- How would you call the mark locking knob behavior?
|
I am thinking more in terms of the slider code I just modified. In that code, the ticks are marked for every minorticks and thick one for every majorticks. The increment is by minorticks.
The knob locks on to minortick increments. Majorticks is just a special case of minorticks as I see it.
This is the relevant part of that code
// draw gradations
for( int i = Min();
( m_nMajorTicks > 0 ) && ( i <= Max() ) ;
i += ( m_nMinorTicks == 0 ? m_nMajorTicks : m_nMinorTicks ) ) {
int nPos = SliderToClient( i );
if( ( m_nMajorTicks != 0 ) && ( i % m_nMajorTicks ) == 0 )
DrawTick( w, MAJOR, (HOVE)HoVe( HORZ, VERT ), nPos, i );
else if( ( m_nMinorTicks != 0 ) && ( i % m_nMinorTicks ) == 0 )
DrawTick( w, MINOR, (HOVE)HoVe( HORZ, VERT ), nPos, i );
}
Regards
|
|
|
|
| Re: Knob control [message #27965 is a reply to message #27963] |
Thu, 12 August 2010 10:23 |
|
koldo
Messages: 3459
Registered: August 2008
|
Senior Veteran |
|
|
| Quote: |
the ticks are marked for every minorticks and thick one for every majorticks. The increment is by minorticks.
|
Ok
A question: The Knob sensibility and behavior when using it with mouse and keyboard is right for you?. When selected and/or clicked it changes slightly its shape.
Best regards
Iñaki
[Updated on: Thu, 12 August 2010 10:25] Report message to a moderator |
|
|
|
|
|
|
|
|
|
| Re: Knob control [message #28060 is a reply to message #27950] |
Sat, 14 August 2010 04:04 |
jerson
Messages: 202
Registered: June 2010
Location: Bombay, India
|
Experienced Member |
|
|
Hi Koldo
This looks very good. Thank you
Since it is a work in progress, I guess, the USC does not link to the knob properly and I get errors if I try to SetFineTicks(IIRC) and some other parameters too.
Regards
[Updated on: Sat, 14 August 2010 05:09] Report message to a moderator |
|
|
|
|
|
|
|
|
|
|
|
| Re: Knob control [message #28115 is a reply to message #28114] |
Tue, 17 August 2010 10:36 |
|
|
Hi Koldo!
Respect man I remember doing usc paint for GridCtrl.. Esc language is ok but the main trouble is you have to write paint code twice and then maintain it. It would be great if it was possible to use real widgets in designer. I guess FormEditor follows this way.
|
|
|
|
|
|
|
|
| Re: Knob control [message #28124 is a reply to message #28118] |
Tue, 17 August 2010 18:22 |
|
|
Hi,
I apologize for engaging into slightly off-topic discussion, but I couldn't help it
| unodgs wrote on Tue, 17 August 2010 10:36 |
It would be great if it was possible to use real widgets in designer. I guess FormEditor follows this way.
|
Unfortunately FormEditor can AFAIK use only widgets that are compiled in. Compiling theide every time you change something in a widget would be tedious. That might or might not be solvable in the future using some plugin-like solution to let the widget to be compiled separately. But in the meantime, I guess it should not be that hard to learn Esc how to use Painter, at least the basic functions.
| koldo wrote on Tue, 17 August 2010 16:01 |
Meanwhile I strongly encourage all contributors to:
- Use Painter
Visual experience is much better
- Create .usc widgets for your classes
If a visual class is not in .usc, it does not exist 
|
I strongly agree with both and join your encouragement 
Best regards,
Honza
|
|
|
|
|
|
|
|
|
|
| Re: Knob control [message #28137 is a reply to message #27950] |
Wed, 18 August 2010 15:00 |
jerson
Messages: 202
Registered: June 2010
Location: Bombay, India
|
Experienced Member |
|
|
Hi Koldo
I think I caught some bugs on the knob USC. SetMajorMarks to 3, SetMinorMarks to 4 and the widget display is wrong. However, the CPP paint does its job well. Same way, set SetMajorMarks to 4, SetMinorMarks to 5 and the USC code crashes.
Another minor suggestion, I would define major and minor marks differently like this; but, that's my opinion.
MajorTickInterval and MinorTickInterval so user can decide the tick interval in terms of a quantum of the range. MajorTickinterval of 25 means a major tick every 25 counts of the range and minortick of 5 means a dot every 5 counts of the range
I've done something like that in the slider.cpp file I uploaded on the slider thermometer thread.
this is the relevant paint code
// draw gradations
for( int i = Min();
( m_nMajorTicks > 0 ) && ( i <= Max() ) ;
i += ( m_nMinorTicks == 0 ? m_nMajorTicks : m_nMinorTicks ) ) {
int nPos = SliderToClient( i );
if( ( m_nMajorTicks != 0 ) && ( i % m_nMajorTicks ) == 0 )
DrawTick( w, MAJOR, (HOVE)HoVe( HORZ, VERT ), nPos, i );
else if( ( m_nMinorTicks != 0 ) && ( i % m_nMinorTicks ) == 0 )
DrawTick( w, MINOR, (HOVE)HoVe( HORZ, VERT ), nPos, i );
}
Best Regards
|
|
|
|
|
|
| Re: Knob control [message #28141 is a reply to message #28140] |
Wed, 18 August 2010 17:09 |
jerson
Messages: 202
Registered: June 2010
Location: Bombay, India
|
Experienced Member |
|
|
| koldo wrote on Wed, 18 August 2010 20:31 |
I understand the algorithm but I do not know the reason. Why to have MajorTickinterval, MinorTickInterval and range instead of simply MajorTickinterval and MinorTickInterval?
|
Simply MajorTickInterval and MinorTickInterval should be fine. Range is nothing more than Min & Max and stays as it is.
An example. If I have Max = 100, MinorTickInterval = 5 and MajorTickInterval = 20, I will get minor marks at 5,10,15, major mark at 20, minor at 25,30,35, major at 40 and so on. Only reason I suggested this arrangement is it is easier to understand while designing the UI.
|
|
|
|
| Re: Knob control [message #28148 is a reply to message #28141] |
Wed, 18 August 2010 22:27 |
|
koldo
Messages: 3459
Registered: August 2008
|
Senior Veteran |
|
|
| jerson wrote on Wed, 18 August 2010 17:09 |
| koldo wrote on Wed, 18 August 2010 20:31 |
I understand the algorithm but I do not know the reason. Why to have MajorTickinterval, MinorTickInterval and range instead of simply MajorTickinterval and MinorTickInterval?
|
Simply MajorTickInterval and MinorTickInterval should be fine. Range is nothing more than Min & Max and stays as it is.
An example. If I have Max = 100, MinorTickInterval = 5 and MajorTickInterval = 20, I will get minor marks at 5,10,15, major mark at 20, minor at 25,30,35, major at 40 and so on. Only reason I suggested this arrangement is it is easier to understand while designing the UI.
|
Oh. In fact the first version was like this, like in Meter.
If everything agrees I will implement it tomorrow.
Best regards
Iñaki
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Wed May 27 13:21:52 GMT+2 2026
Total time taken to generate the page: 0.00883 seconds
|
U++ framework
Search
Help
Members
Register
Login
Home
The original name I wanted to quote is SetFineStep from the USC file. I renamed it to SetMinorMarks in the .USC file, but then I realised it is not implemented in the CPP file.
