|
|
|
Home » U++ TheIDE » U++ TheIDE: Installation, Compiling and Running of theide » problems with creating new packages
| problems with creating new packages [message #9346] |
Mon, 30 April 2007 12:04  |
yeus
Messages: 19
Registered: October 2006
|
Promising Member |
|
|
well.. I have ubuntu 7.4 feisty installation without any problems.
It's just that I can't create new packags from templates, because the only template that exists is the <empty> template.
Any idea why? And how do I avoid it?
Greetings, Tom
|
|
|
|
|
|
|
|
|
|
| Re: problems with creating new packages [message #10565 is a reply to message #10563] |
Mon, 16 July 2007 20:09  |
waxblood
Messages: 95
Registered: January 2007
|
Member |
|
|
I took them from an earlier linux package of upp in which they were contained. I figure these are the only officially supported for Linux. Which is the template that doesn't work for you in the four?
The missing templates from the Windows version are 2 for an SDL project and 2 for Win32 apps. Don't know if they works in Linux.
If you have to do an SDL app, don't do it. Use Ogre or Crystal Space instead  , as for win apps, who cares about them?
You may need the Wenzel's one named Standard Application, which is useful but afaik it doesn't compile on Linux. Quite strangely, I've made a project with Standard Application template in Windows, built it, then I opened the same project in Linux, I re-built it, and it worked!
The Template Intriguing Mystery continues...
Ciao,
David
|
|
|
|
|
|
|
|
|
|
|
|
| Re: problems with creating new packages [message #39346 is a reply to message #39344] |
Wed, 13 March 2013 10:40 |
|
|
Hi Sietze,
Yes, it would be better to start a new thread, then performing necromancy on this one  Especially since your problem is probably not related. But nevermind...
The templates reside in .upt files, which are part of the deb package:$ dpkg-deb -c Downloads/upp_5841-1~squeeze0_all.deb | grep upt
-rw-r--r-- root/root 176 2012-08-31 14:09 ./usr/share/upp/uppsrc/Core/sub.upt
-rw-r--r-- root/root 706 2012-08-31 14:09 ./usr/share/upp/uppsrc/Core/core.upt
-rw-r--r-- root/root 543 2012-08-31 14:09 ./usr/share/upp/uppsrc/CtrlLib/Normal.upt
-rw-r--r-- root/root 1549 2012-08-31 14:09 ./usr/share/upp/uppsrc/CtrlLib/Complex.upt
-rw-r--r-- root/root 3969 2013-02-20 01:00 ./usr/share/upp/uppsrc/Skylark/Skylark.upt
drwxr-xr-x root/root 0 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/
-rw-r--r-- root/root 2224 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/SDLCore.upt
-rw-r--r-- root/root 2171 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/SDLPure.upt
-rw-r--r-- root/root 4993 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/Win32.upt
-rw-r--r-- root/root 249 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/Console.upt
-rw-r--r-- root/root 925 2013-02-20 01:00 ./usr/share/upp/uppsrc/upt/Win32dll.upt
Can you check that your assembly is correctly set up and that the files are present in the nests? If you're not sure how to check that, you can find the details in the manual.
Best regards,
Honza
|
|
|
|
|
|
| Re: problems with creating new packages [message #39380 is a reply to message #9346] |
Thu, 14 March 2013 23:53 |
Sietze
Messages: 4
Registered: March 2013
Location: The Netherlands
|
Junior Member |
|
|
Your info got me searching around and :
Well it turns out that it's a nasty dependency problem,
Upp is not installed.
It was probably removed with the apt-get -f install .
Maybe I just have the wrong version of upp for squeeze,
So I tried adding the nightly build repository and it worked,
but then this comes up.
upp:
Depends: libgtk2.0-dev but it is not going to be installed
Depends: libnotify-dev but it is not going to be installed
So maybe somebody already asked about this,
However I will never again wake a thread from the dead.
it might come and hound me.
Or maybe you know how to solve this.
But first I need some sleep.
Or it might be necessary to wake me from the dead.
I have been working hard today.
Greetings and thanks for the info so far.
[Updated on: Fri, 15 March 2013 18:45] Report message to a moderator |
|
|
|
| Re: problems with creating new packages [message #39384 is a reply to message #39380] |
Fri, 15 March 2013 06:58 |
|
|
| Sietze wrote on Thu, 14 March 2013 23:53 |
upp:
Depends: libgtk2.0-dev but it is not going to be installed
Depends: libnotify-dev but it is not going to be installed
|
Ok, we finally found the problem Those two packages are standard in debian squeeze, I see no reason why apt-get should refuse to install them, unless they conflict with some other packages already installed. I'd recommend you to try to install upp with aptitude, it is OMHO much better at solving dependencies and it usually gives you a aselection from several possible solutions when it comes to problems like this.
Meanwhile, a quick fix could be to use svn sources. If you start theide with -install argument, you can select SVN synced sources (and defaults for the rest of questions) and TheIDE should take care of everything for you.
Honza
[Updated on: Fri, 15 March 2013 06:58] Report message to a moderator |
|
|
|
| Re: problems with creating new packages [message #39403 is a reply to message #39384] |
Fri, 15 March 2013 18:39 |
Sietze
Messages: 4
Registered: March 2013
Location: The Netherlands
|
Junior Member |
|
|
The problem is solved.
After some tinkering with aptitude it was installed,
it turns out that having things installed from the
squeeze-backports gives some problems,
(I like to have the latest browsers and it suggested
in the first place downgrading the browsers and removing xulrunner 10 ),
but much to my liking the program came with more alternatives,
I used aptitude --full-resolver install upp and pressed n a couple
of times until it suggested installing more stuff from
squeeze-backports.
To make things simple I first installed theide afterwards,
I wanted to see what aptitude did for upp and didn't want to be
bothered with packages concerning dependency's of theide.
I should use aptitude more often.
After this guess what no templates.
But I thought maybe directory's already present messed things up.
So I logged in in my girlfriends account on my laptop.
And there it was examples templates every thing complete.
So next thing I removed every upp related dir from my home dir,
there wasn't anything there that I needed in there,
but I moved them to the thrash to be sure
(I don't like removing things and later on finding out that I
removed something I still need to use, I learned the hard way).
And started up theide again and there it was everything I needed,
to start enjoying programming again,
I have not seriously programmed for a long time and need to learn
my skills again and see if I am still smart or at least not stupid  .
Thank you very much for your suggestions they were very help full  !!!
Many Thanks
Sietze
[Updated on: Fri, 15 March 2013 18:47] Report message to a moderator |
|
|
|
Goto Forum:
Current Time: Fri Apr 25 17:47:21 CEST 2025
Total time taken to generate the page: 0.01315 seconds
|
|
|
Members
Pages
Help
Register
Login
Home
