U++ forum: Welcome to the forum

Re: Multi monitor support for X11 backend [message #40091 is a reply to message #40090]

Sun, 09 June 2013 22:14

Klugier
Messages: 1076
Registered: September 2012
Location: Poland, Kraków

Senior Contributor

Hello Zbych,

Here is my log file from debug mode:

* /home/klugier/upp-out/MyApps/GCC.Debug.Debug_Full.Gui.Noblitz.Nogtk.Shared.Sse2/MultiMonitorTest 09.06.2013 22:12:23, user: klugier

09.06.2013 22:12:23 VGA-0: 1920x1080+1920+0
09.06.2013 22:12:23 HDMI-0: 1920x1080+0+0
09.06.2013 22:12:23 XrandrGetScreenArea(true):
09.06.2013 22:12:23 	[0] = [1920, 0] - [3840, 1080] : (1920, 1080)
09.06.2013 22:12:23 	[1] = [0, 0] - [1920, 1080] : (1920, 1080)
09.06.2013 22:12:23 XineramaGetScreenArea():
09.06.2013 22:12:23 	[0] = [1920, 0] - [3840, 1080] : (1920, 1080)
09.06.2013 22:12:23 	[1] = [0, 0] - [1920, 1080] : (1920, 1080)
09.06.2013 22:12:23 struts:
09.06.2013 22:12:23 	[0] = 0
09.06.2013 22:12:23 	[1] = 0
09.06.2013 22:12:23 	[2] = 0
09.06.2013 22:12:23 	[3] = 45
09.06.2013 22:12:23 	[4] = 0
09.06.2013 22:12:23 	[5] = 0
09.06.2013 22:12:23 	[6] = 0
09.06.2013 22:12:23 	[7] = 0
09.06.2013 22:12:23 	[8] = 0
09.06.2013 22:12:23 	[9] = 0
09.06.2013 22:12:23 	[10] = 1920
09.06.2013 22:12:23 	[11] = 3839
09.06.2013 22:12:23 work_area:
09.06.2013 22:12:23 	[0] = [1920, 0] - [3840, 45] : (1920, 45)
09.06.2013 22:12:23 	[1] = [0, 0] - [1920, 1080] : (1920, 1080)
09.06.2013 22:12:23 original_work_area:
09.06.2013 22:12:23 	[0] = [0, 0] - [3840, 1035] : (3840, 1035)
09.06.2013 22:12:23 Ctrl::GetVirtualScreenArea() = [0, 0] - [3840, 1080] : (3840, 1080)
09.06.2013 22:12:23 Ctrl::GetVirtualWorkArea() = [0, 0] - [3840, 1035] : (3840, 1035)
09.06.2013 22:12:23 TIMING GetScreenArea  : 70.00 ms - 70.00 ms (70.00 ms / 1 ), min: 70.00 ms, max: 70.00 ms, nesting: 1 - 1

Sincerely,
Klugier

U++ - one framework to rule them all.

Report message to a moderator